XIM Peel bond (stirred not shaken)

These are a couple of high quality primers with damage to the rim so they cannot be shaken. Because they are STIR ONLY they are heavily discounted. I recommend picking up a drill mixer from the Repcolite location you pick this product up from but if you are on a budget they can provide you with free stir sticks.

XIM’s Peel Bond is a unique, high build, water-based, penetrating, bonding primer/sealer. It is formulated to bond-to and seal a wide range of construction materials. It can reduce the cracking and peeling or the top coat paint by remaining flexible over the life of the paint. It can help reduce the time spent on surface Preparation, however, it is not a complete substitute for all surface preparation and all surface conditions.

• Applies up to 30 mils wet
• Reduces labor and prep time
• Bonds to plywood, T1-11, PVC, aluminum and more
• Cures at temp as low as 40° F surface temp and cures at humidity up to 90%
• Interior / Exterior

For Best Results

• Be sure the surface is clean and dry, free from dust, grease, wax, oil, and other surface contaminants. Clean with a strong detergent, rinse and allow to dry.